Command Refill Strips, Outdoor, Small
16 strips
On This Page
Directions
Not Recommended on rough surfaces, such as cement board, brick or rough-swan wood. Failure to follow instructions carefully may cause damage. Save instructions or visit command.com. Apply: 1 Clean surface with rubbing alcohol. Do not use household cleaners. 2 Separate strips. Remove blue liner. Press adhesive to clip. 3 Remove black liners. Press firmly to surface for 30 seconds per clip. 4 Use one clip for every 2 feet of light. 5 Wait 1 hour before hanging lights. Remove: 1 Gently hold clip in place. 2 Never pull the strip towards you! Always pull straight down. 3 Stretch the strip slowly against the wall at least 6 inches to release.
Product Details
Damage-free hanging. Holds strongly. Removes cleanly. Outdoor Exteriors. Limited warrant and limitation of liability. (for product sold in USA). command.com Made in USA with US and globally sourced materials.Nutrition Facts
Warnings
Caution: Do not hangover beds or on wallpaper. Do not hang valuable or irreplaceable items or framed pictures. Apply 15 degrees to 125 degrees F holds- 20 degrees to 125 degrees F.Manufacturer
3M
3M Center St. Paul, MN 55144
UPC
00051141391212