Command Broom Gripper
1 package
On This Page
Directions
Apply: 1. Clean surface with rubbing alcohol. Do not use household cleaners. 2. Separate strips. Remove red liners. Press adhesive to broom gripper. 3. Remove black liners. Press firmly to wall for 30 sec. Wait 1 hour before use. 4. Push broom in to hold. Pull broom out to release. Remove: 1. Hold broom gripper gently in place. 2. Never pull the strip towards you! Always pull straight down. 3. Stretch each strip slowly against the wall at least 15 inches to release.
Product Details
Holds up to 4 lb (1.8 kg). Damage-free hanging. Holds strongly. Removes clearly. General purpose. Designed to hold mops and brooms with handle diameters of 0.8 inch to 1.0 inch. Gripper can be reused with Command Large Refill Strips. Limited Warranty and Limitation of Liability (for product sold in USA): This product will be free from manufacturing defects. If defective, your exclusive remedy shall be, at 3M's option, product replacement or refund. 3M will not be liable for any loss or damage arising from this product, whether direct, indirect, special, incidental or consequential. command.com. command.com/howtouse. Save instructions or visit command.com. 1-800-934-7355. Broom gripper made in Mexico. Strips made in USA.Nutrition Facts
Warnings
Caution: Failure to follow instructions may result in damage or injury. Do not hang valuable items or framed pictures. Do not hang over beds or on wallpaper. Use indoors: 50 degrees to 105 degrees F.Manufacturer
3M
St. Paul, MN 55144
UPC
00051141409474