Command Picture Hanging Strips, Value Pack
8 strips 4 pairs
On This Page
Directions
Prep: Wait 7 days after painting before use. Remove hanging hardware. Do not apply to paper or fabric surfaces on frame. Wipe wall with rubbing alcohol. Do not use household cleaners or water. Apply: (1) Separate strips. Click strips together. (2) half way down. (3) 30 seconds. Remove one side of liners. Stick on frame as shown. Press firmly. Remove remaining liners. Press frame firmly to wall. Complete steps 4-6. (4) Temporarily remove frame from wall to reinforce strips. Peel frame as shown. (5) Press each strip on wall for 30 sec. Wait 1 hour for adhesive to build. (6) Align strips. Press frame until each pair of strips clicks. Remove instruction on other side.
Product Details
8 large pairs; 4 medium pairs. UP to 24 inches x 36 inches (60 cm x 90 cm). Medium Holds: 12 lb (5.4 kg). Large Holds: 16 lb (7.2 kg). Damage-free hanging. Holds strongly. Removes cleanly. Craft. Limited Warranty/Limitation of Liability (USA) Product is tree from manufacturing defects. If defective, 3M will replace or refund at 3M's option. 3M is not liable for any loss or damage, whether direct, indirect, incidental or consequential. command.com/howtouse. For more Command products, visit the Hardware Department. Made in USA with globally sourced material.Nutrition Facts
Warnings
Caution: Failure to follow instructions may result in damage or injury. Do not hang valuable items or objects greater than 2 in thick. Do not hang over beds or on wallpaper. Use indoors: 50-105 degrees F.Manufacturer
3M
St. Paul, MN 55144
UPC
00051141599854