Permatex Ultra Copper Gasket Maker, Maximum Temperature
147 ml
On This Page
Directions
Directions: 1. For best results, surfaces should be clean and dry. 2. Cut nozzle and apply a continuous 2mm to 6 mm (1/16 in to 1/4 in) bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. 3. Let dry for one hour then tighten to torque specifications. 4. Allow 24 hours to fully cure before filling with fluids or returning to service. 5. Replace cap after use. Note: Not recommended for use on head gaskets or parts in contact with gasoline.
Product Details
Advanced formula. High temperature and performance applications. Ideal for exhaust gaskets. Sensor safe. OEM specified. Spec no. 101. Ultra Copper is the most advanced high performance, high temp RTV gasket available. Specifically formulated for 4-cylinder, turbocharged or performance engines. Temp Range: -54 degrees to 316 degrees C (-65 degrees to 600 degrees F) continuous, 371 degrees C (700 degrees F) intermitted. www.permatex.ca. Assembled in U.S.A. with U.S. and global materials.Nutrition Facts
Warnings
Caution: irritant.,Caution: May irritate eyes and skin. Do not get in eyes, on skin or clothing. Do not breathe fumes. Keep out of reach of children.,First Aid Treatment: Contains polydimethylsiloxane, calcium carbonate, isoparaffinic hydrocarbon. If swallowed, call a Poison Control Centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water.Manufacturer
ITW Permatex
Milton, ON Canada
UPC
00068161597050