Permatex Gasket Maker, Ultra Copper
300 ml
On This Page
Directions
Directions: 1. For best results, surfaces should be clean and dry. 2. Cut nozzle and apply a continuous 2 to 6 mm (1/16 inch to 1/4 inch) bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. 3. Let dry for one hour then tighten to torque specifications. 4. Allow 24 hours to fully cure before filling with fluids or returning to service. 5. Replace cap after use. Note: Not recommended for use on head gaskets or parts in contact with gasoline. -54 degrees C to 371 degrees C (-65 degrees F to 700 degrees F) intermittent. Temp Range: -54 degrees C to 316 degrees C (-65 degrees F to 600 degrees F) continuous, 371 degrees C (700 degrees F) intermittent.
Product Details
Ideal for high temperature parts. Sensor safe RTV silicone. Meets OEM specs. Ultra Copper Gasket Maker maintains seal integrity in the highest temperature applications up to 371 degrees C (700 degrees F) intermittent. High performance. Sensor safe. Non-corrosive. Superior oil resistance. OEM specified. Excellent adhesion. Applications: exhaust manifolds/headers, turbochargers, valve covers, oil pans, timing covers, water pumps, thermostat housing. www.permatex.ca. Assembled in U.S.A. with US, and global materials.Nutrition Facts
Warnings
Caution: Irritant.,Caution: May irritate eyes and skin. Do not get in eyes, on skin or clothing. Do not breathe fumes. Keep out of reach of children.,First Aid Treatment: Contains polydimethylsiloxane, calcium carbonate, isoparaffinic hydrocarbon. If swallowed, call a Poison Control Centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water.Manufacturer
ITW Global Brands
Oakville, ON Canada
UPC
00068161597135