Permatex Cold Weld, Epoxy
56 g
On This Page
Directions
Directions: 1. For best results, roughen surface and remove any grease and oil. Clean and dry surfaces to be joined or repaired. 2. Remove tube caps. Pierce end of tubes with the back of cap. 3. Squeeze equal amounts of resin and hardener onto a discardable surface. Squeeze with equal pressure from bottom of tubes so diameter of bead is uniform. 4. Mix thoroughly until evenly coloured. 5. Apply to surfaces to be joined or repaired. Adhesive starts to set in 8 minutes. Epoxy will fixture in 30 minutes and fully cure in 24 hours. When storing, clean caps and tube threads. Replace caps to original tube (colour coded), or hardening may occur in tube nozzles. Note: not recommended for use on polyethylene or polypropylene plastics.
Product Details
Steel reinforced. 8 min set time. 30 min cure time. Up tp 3000 PSI. Industrial strength can be drilled, threaded and machine. Bonds: Aluminum, steel, stainless steel, brass, bronze. copper, iron & amp; and other metals. An Alternative to Welding; Permatex Cold Weld is a fast-setting, steel-reinforced epoxy that can be used to repair, form or rebuild steel and many other metals. Non-rusting, non-shrinking, and non-flammable formulation. Once cured, repair can be drilled, tapped, machined, filed and painted. Resists auto and shop fluids. Sets in 8 minutes; Fills holes & repairs cracks; Fixture Time: 30 minutes; Dries dark grey; Excellent moisture resistance; Permanent strength 3000 PSI. Temp Range: -51 degrees C to 150 degrees C (-60 degrees F to 300 degrees F) continuous, 177 degrees C (350 degrees F) intermittent. www.permatex.com. Made in U.S.A. with US and global materials.Nutrition Facts
Warnings
Caution: Irritant.,May irritate eyes. May irritate skin. Do not get in eyes. Do not get on skin or clothing. Do not breathe fumes. Wear gloves. Keep out of reach of children.,First Aid Treatment: Contains epoxy resin, polymercaptan amines. If swallowed, call a Poison Control Centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water.Manufacturer
ITW Global Brands
Oakville, ON Canada
UPC
00068161813747