Permatex Plastic Welder, Black
25 ml
On This Page
Directions
Directions: 1. For best results roughen surfaces using an abrasive or sandpaper. Surfaces must be clean, dry and free of grease and oil. 2. Remove plastic mixing paddle from center of black plunger. Turn nozzle end up and snap off storage cap (save cap). Pull plunger back 3mm (1/8 inch). Allow air bubbles to rise to top. 3. When ready, push plunger evenly to dispense equal amounts of hardener and resin onto a discardable surface (a piece of cardboard or the plastic package). Pull back plunger to stop flow. 4. Mix thoroughly with the paddle. 5. Apply to surfaces. Adhesive will start to set in 5 minutes and achieve fixture strength in 10 minutes. Full cure in 24 hours. 6. Wipe nozzle clean. Replace cap for storage. Note: Will not bond to polyethylene or polypropylene plastics.
Product Details
5 min set time. 10 min cure time. Up to 3500 PSI. Non-sagging formula resists weathering & humidity. Bonds: ABS, acrylic, fiberglass, glass PVC, plastic, metal, vinyl & more. A strong structural adhesive formulated for bonding similar or dissimilar materials as well as unprepared metals. Resists weathering, high humidity and temperature variations. Cured adhesive can be drilled, sanded and painted. Sets in 5 minutes. Cures in 10 minutes. Temp range: -51 degrees C to 121 degrees C (-60 degrees F to 250 degrees F). Finished colour: Black. Permanent strength up to 3500 PSI. www.permatex.ca. Assembled in U.S.A. with U.S. and global materials.Nutrition Facts
Warnings
First Aid Treatment: Adhesive: Contains methyl methacrylate, 2,6 di-tert-butyl-p-cresol, para-tosyl chloride, methacrylic acid, and cumene hydroperoxide. Activator: Contains methyl methacrylate and 3,5-diethyl-1,2-dihydro-1-phenyl-2-propyl pyridine. If swallowed, call a poison control centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water. If on clothes, remove clothes.,Danger: Corrosive. Flammable. Causes burns. Contents may catch fire. May irritate eyes. May irritate skin. Do not mix with other chemicals. Do not swallow. Do not smoke. Do not get in eyes. Do not get on skin or clothing. Handle with care. Wear latex or nitrile gloves and safety glasses. Use only in a well-ventilated area. Keep away from flames, such as a pilot light, and any object that sparks, such as an electric motor. Keep out of reach of children.Manufacturer
ITW Global Brands
Oakville, ON Canada
UPC
00068161841269