Cleara Water Dispenser System, Filter Refill
2 filters
On This Page
Directions
How To Use: 1. unscrew spigot and remove filter from the dispenser. Pull filter out of spigot and remove plastic wrap. 2. Rinse filter under faucet with cold water for 15 seconds. 3. Press filter into spigot, insert and screw spigot securely onto the dispenser. 4. Fill your dispenser with potable water (). 5. Open spigot and let water flow for 30 seconds (approximately 1.5 quarts). Discard this water or use it to water plants. 6. To increase the flow of your filtered water from the spigot, loosen the top cap. 7. Replace filter every two months. Should the filter ever dry out, repeat steps 2 - 5 before using again.
Product Details
Advanced water dispenser system with fast filling opening and continuous filtration. Contents: 2 filters / 1 spigot. Use on any of Arrow Home Products line of dispensers! Reduces chlorine and improves taste and odor. Filters 40 gallons of drinkable water. Replacement filter for model: No 74550 / 74650 / 74750 / 75650 / 76350 / 76550 / 76900. Large filter surface area improves flow of water out of spigot. System certified by WQA to NSF/ANSI 42 when used in the Cleara water dispenser systems for the reduction of chlorine, as verified and substantiated by test data. www.arrowhomeproducts.com. No Bisphenol - A. BPA free. Made in USA of domestic and imported parts.Nutrition Facts
Warnings
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.Manufacturer
Arrow Home Products Co.
Elk Grove Village, IL 60007
UPC
00070652769501