Dr. Brown's Soft Spout Transition Cup 6m+
On This Page
Use and cleaning: Disassembly: Unscrew the cup from the spout cap. If your cup has handles, remove the handles. Remove the valve from the spout cap by pulling on the valve tab. Cleaning: Wash all parts prior to use. Always use clean hands and surfaces. Between uses, all parts should be washed in hot, soapy water and thoroughly rinsed. All parts are also dishwasher safe - top rack only. Assembly: Install the valve to the spout cap by inserting it into the spout opening from below. If your cup has handles, place them over ring of cup. Fill cup with liquid for feeding. Screw the spout cap onto the cup until snugly fit.
DescriptionDr. Brown's® Soft Spout Transition Cup 6m+. Soft spout transition cup. Additional warnings and instructions inside. Spill-proof. BPA free.
Other DescriptionHappy Feeding™. Soft spout transition cup. One-piece, soft silicone spout. Handles designed for baby. Attached lid stays open when baby drinks and keeps spout clean when not in use. Easy to use/easy to clean/dishwasher safe. drbrownsbaby.com. (800) 778-9001. ©2015 Handi-Craft Company.
Allowing your child to use this product for prolonged periods separate from regular mealtimes or to go to sleep while drinking liquids, other than water, from this sippy cup may cause or contribute to early childhood tooth decay.
For your child's safety and health.
Always use this product with adult supervision.
Continuous and prolonged sucking of fluids will cause tooth decay.
Always check food temperature before feeding.
Always use transition cup with valve installed. The transition cup will not function properly without it.
The spout must be clean and free of obstructions.
Always wash all components immediately after use.
Hot or carbonated liquids are not recommended.
Due to the risk of hotspots and over-heating, use of a microwave oven is not recommended.
Avoid overly aggressive cleaning of any parts to prevent damage to sealing surfaces.
Do not boil or microwave to sterilize parts.
Do not leave the product in direct sunlight or heat, store the product in a dry environment.
Keep all components not in use out of the reach of children.
Before each use, inspect all components for wear or damage.
To prevent a possible choking hazard, test the strength of the valve regularly by pulling hard on the valve while looking for cracks or wear.
Always use with adult supervision and do not leave child unattended with the transition cup.
Do not allow a child to walk or run while using cup.
Never use the spout as a pacifier or teether.
Extended contact with milk, formula, juice or sweet liquids may cause severe tooth decay.
If any component becomes cracked, torn or shows other signs of excessive wear, discontinue use immediately and discard worn or damaged parts.
Be sure to contact your physician with any feeding problems or questions.
Allowing your child to use this product for prolonged periods separate from regular mealtimes or to go to sleep while drinking liquids, other than water, from this transition cup may cause or contribute to early childhood tooth decay.