Resolve High Traffic Area Carpet Foam
On This Page
Directions
Before cleaning: vacuum carpet thoroughly to remove loose dirt. Test a small, hidden area for colorfastness and examine when dry. If colors affected do not use. For upholstery, look for manufacturer's cleanability code tag. Use on fabrics coded "WS" or "W". If coded "X" or "S" do not use. Not recommended for use on velvet, silk, vinyl, or leather. Do not use Resolve® easy clean pro on any surface other than carpet. Large area carpet cleaning: 1. Shake can well. Hold can upside down about 2 feet above carpet. Spray foam evenly over a 3 foot square area. 2. Work the foam into carpet in two directions using a damp, colorfast mop. 3. Repeat steps 1 & 2 until the entire area is cleaned. 4. When dry thoroughly to remove dried foam and loosened dirt. For use in Resolve® easy clean pro carpet brush: 1. Remove spray cap from Resolve® High Traffic Foam 22oz can. Shake the can vigorously before each use. If the can is already in the gadget, remove and shake again. 2. Insert can into the gadget and rotate clockwise until it gently clicks into the locked position. 3. To remove the can, rotate counter-clockwise into the unlocked position and gently pull upwards. 4. Pull trigger to dispense foam, then brush the foam into the carpet. When dry, vacuum thoroughly to remove dried foam and loosened dirt. 5. Replace spray cap to can for standard use. Upholstery cleaning: 1. Blot wet soils with a clean absorbent cloth. 2. Shake can well and generously apply directly to stain from a distance of 4-6 inches. Allow foam to absorb into stain for 3 minutes. 3. Gently blot area with a clean, damp, colorfast sponge or cloth. Rub gently if required. Do not overwet fabrics. Hint: To avoid rings, clean entire section where soil occurs. 4. Rinse sponge or cloth and repeat as necessary. Allow fabric to dry thoroughly before use. 5. Only use spray cap to dispense foam for upholstery cleaning. To ensure complete dispensing during life of product, tilt can downwards at approximately 60 degrees while spraying. Contents will clean a carpeted area of 168 square feet (12' x 14'). If accidentally sprayed on wood furniture, just wipe off. For best results: Use vacuum cleaner with a fresh, empty bag.
Description
Resolve® High Traffic Area Carpet Foam Crisp Linen Scent. Cleans, freshens & softens. 3x more dirt removal*. Large area carpet cleaner.Other Description
Crisp linen scent high traffic foam large area carpet cleaner. Helps ensure that your high traffic areas are clean, fresh and soft, 3x more dirt removal* with freshening agents and a special conditioning ingredient. Resolve® crisp linen high traffic foam... Safely cleans & deodorizes with a refreshing crisp linen scent. Protects against dirt. Helps prevent future soils. Makes carpet cleaning super easy! Try with Resolve® easy clean pro system. Resolve® high traffic foam carpet cleaner is safe to use on wool, nylon and stain-resistant carpet. *than vacuuming alone. Contains no phosphorus. Health. Hygiene. Home. Steel: Please recycle when empty. Questions? 1-800-228-4722. For ingredients information, www.powerofresolve.com. ©2015 RB.Warnings
Caution: Contents under pressure.Read precautions on back.
Keep out of reach of children and pets.
Caution: May cause eye irritation. Contents under pressure. Do not spray towards face. Avoid contact with eyes and skin. Container may explode if heated. Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 120 degrees F, as container may burst. First aid: if in eyes, immediately rinse eyes with plenty of water. When using Resolve® easy clean pro carpet brush, 15 minutes. If irritation persists, get medical attention. When using Resolve® easy clean pro carpet brush, direct aerosol away from face when loading the device and replacing the spray cap to can.
Distributor
Reckitt BenckiserParsippany, NJ 07054-0224
1-800-228-4722
www.powerofresolve.com
UPC
00019200951678