Brita Water Filtration Bottle Hard Sided
On This Page
Directions
Rinse filter under running water for 15 seconds prior to first use. Getting started. 1. Hand-wash bottle and cap with mild soap. Rinse well. 2. Important: rinse filter under running water for 15 seconds. 3. Drop in filter and press down firmly until filter is flush with straw. 4. Align lid and straw in unlocked position, and rotate straw to lock. 5. Fill bottle with water, screw on lid firmly, then sip and enjoy. Replace filter every 2 months or 40 gallons. Cleaning instructions: Remove the filter before cleaning your Brita Bottle™ water filtration system. All plastic components (bottle, cap, straw and mouthpiece) can be washed in the dishwasher (top rack only) or by hand with a mild soap. For best results: hand wash cap and mouthpiece periodically with a mild detergent. Rinse well. Storage instructions: Empty water from your Brita Bottle™ water filtration system before storing, and loosen large cap from the bottle to prevent odors. After periods of nonuse or as required, wash bottle and caps with warm water and mild soap, then rinse thoroughly. Do not wash filter. Fresh filter = fresher water. Change your filter every 2 months for great-tasting water!* The Brita Bottle™ filter processes up to 40 gallons of water and is intended to be used with a Brita Bottle™ filter inside. Do not use hot water (max. temp. 85 degrees F/29 degrees C min. temp. 34 degrees F/1 degrees C). Do not freeze bottle or filter. *Filter replacement is essential for product to perform as represented. Rinse filter under running water for 15 seconds to activate. Insert filter into straw then fill, sip and enjoy.
Description
Brita® Filtration System Hard Sided Water Bottle. Filter inside.. Makes tap water taste great anywhere™. 1 filter can replace 300 water bottles*. 1 bottle/1 filter.Other Description
Particulate measurements in particles/ml. N.A. = not applicable. This system has been tested according to NSF/ANSI 42 for reduction of the substances listed. The concentration of each of the indicated substances in water entering the systems was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 42. Testing was performed under standard laboratory conditions at a flow rate of 0.20 gallons/minute. The contaminants or other substances removed or reduced by this water treatment device are not necessarily in all users' water. Filter performance may vary based on local water conditions. Please refer elsewhere in this user's guide for the proper conditioning and use and care requirements. Maintenance according to the manufacturer's instructions is essential for proper filter performance. Replace the Brita Bottle™ filter every 40 gallons/151 liters. System model no. BB04 and BB05. Replacement filter model no. BB06. The Brita Bottle™ water filtration system has been tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor) and particulate reduction (class VI). NSF®. Independently certified. The Brita Bottle™ filter is not intended to purify water. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Individuals requiring water of special microbiological purity should follow the advice of their doctor or local health officials regarding the use and consumption of their tap water and Brita® filtered water. Substances reduced by this water treatment device are not necessarily in all users' water. BPA free reduces chlorine (taste and odor). Dishwasher safe (top rack only). Replace filter every 216 refills, 2 months or 40 gallons.† (1 bottle = 23.7 oz). †Filter replacement is essential for product to perform as represented. The Brita Bottle™ water filtration system has been tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor) and particulate reduction (class VI). Blue. *Standard 16.9 oz bottles. Tested and certified by NSFI International against NSF/ANSF standard 42 for the reduction of the claims specified on the performance data sheet chemical and mechanical reduction unit. NSF®. 16 oz. 400 ml. Consumer assistance: To stay on top of important water news and new products from Brita, and to locate retailers, visit www.brita.com or call 1-800-24-BRITA (1-800-242-7482). ©2012.Warnings
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before on after the system. Max. temp: 29 degrees C/ 85 degrees F. No warranty is made to use with water at higher temperatures.Distributor
Brita LP1221 Broadway, Oakland, CA 94612
1-800-242-7482
www.brita.com
UPC
00060258358087