Command Soap Dish, Satin Nickel
1 set
On This Page
Directions
Apply: (1) If possible, choose a spot where strips are not over grout lines. Allow space below for removal. (2) Clean surface with rubbing alcohol. Do not use household cleaners. (3) Separate strips. Remove blue liners. Press 2 strips to the mounting base. (4) remove black liners. Press to wall for 10 seconds. (5) To ensure adhesive hold, slide the soap dish up and off. (6) Press base firmly for 30 seconds. (7) Use shower once and wait 24 hours to allow adhesive to build. (8) Slide soap dish back on to the mounting base. Remove: (1) Slide soap dish up and off. (2) Gently hold mounting base in place. (3) Never pull the strip towards you always pull straight down. (4) Stretch the strip slowly against the wall at least 12 inches to release.
Product Details
2 lb (900 g). Holds. 3m. Holds strongly. Removes cleanly. Satin nickel. Proven to hold better than suction cups. Count 1. Rust resistant. Bath. Water resistant strip. Failure to follow instructions carefully may cause damage. Soap dish can be reused with command bath medium refill strips. Limited warranty: Product is free from manufacturing defects. If defective, 3, will replace or refund at 3m’s option 3m is not liable for any loss or damage, whether direct, indirect, incidental or consequential. command.com/howtouse. Save instructions or visit command.com. Soap dish made in China. Strips made in USA.Nutrition Facts
Warnings
Caution: Do not hang over beds or on wallpaper. Do not hang valuable or irreplaceable items or framed pictures. Apply and use 15 degrees 125 degrees F.Manufacturer
3M
St Poul, MN 55144
UPC
00076308728557