Mothers Trim & Plastic Restorer
10 oz (2384 g)
On This Page
Directions
Use On: Any unpainted, smooth or textured exterior hardware - grilles, bumpers, moldings, louvers, windshield cowlings, window trim, vents, seals, skirts, wiper arms, mudguards, mirror housings, door handles, bed rails, running boards and other claddings - anything that's plastic or vinyl. Note: Areas to be treated need not be black to obtain superior results. Not for Use on: Glossy plastic, painted surfaces or on areas where slippery surfaces are not desirable. Directions: Treat on area at a time. Shake well before & during use. Finish should be clean, dry and cool. Do not apply to hot surfaces. 1. Hold can 5-6 inches from surface and spray a thin layer directly onto surface in an overlapping, sweeping motion. 2. With a soft, clean microfiber or terry cloth towel, thoroughly buff all surrounding surfaces dry of any overspray, before moving on to next area. 3. Heavily stained or soiled areas may require a second coat. If needed, apply additional applications when the first coat is dry to the touch (approximately 15 minutes). 4. Allow 24 hours of cure time for maximum durability and protection. Pro Tip: To protect against overspray, and to make cleanup quick and easy, mask of paint or glass around the surface being restored with painter's tape. Should any overspray occur, clean the affected areas with a soft, clean microfiber or terry cloth towel and rubbing alcohol. Note: For best results, first use Back-to-Black Heavy Duty Trim Cleaner.
Product Details
Easy one-step coating. Just spray & walk away! Mothers Back-to-Black Trim & Plastic Restorer aerosol is our simplest trim care creation yet. Drawing upon our industry-proven Back-to-Black surface care technology, this simple mist-on and walk away dressing provides unmatched results and convenient, effortless application. Light oxidation, wax residue and surface film are no match for this surface coating, instantly bringing back that dark, factory-new sheen to any sun-burnt plastic or vinyl. Once fully cured, you’re left with a long-lasting, protective barrier, preventing further deterioration caused by sun, smog, ozone, water, chemicals and airborne contaminants. It makes quick work of tight, difficult-to-reach areas such as grilles, fender wells, engine hoses and other plastic components that are tucked down deep under your hood. Satisfaction guaranteed when used as directed. Manufacturer's liability limited to replacement of product or refund of purchase price upon return of unused portion and proof of purchase. www.mothers.com. Made in USA.Nutrition Facts
Ingredients
Contains: Aliphatic Hydrocarbons and Hexane.Warnings
Danger: Extremely flammable liquid and vapor. Contents under pressure. Possible eye or skin irritant. Danger: Extremely flammable liquid and vapor. Contents under pressure. Vapor may cause flash fire. Avoid prolonged exposure to sunlight and other heat sources that may cause bursting. Keep away from heat and source of ignition. Do not puncture, incinerate or burn. Use only with adequate ventilation. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal. Possible eye or skin irritant. Eyes: rinse thoroughly with water. Skin: wash thoroughly with soap and water. May be harmful if swallowed or inhaled. Ingestion: do not induce vomiting. Drink plenty of water. Get medical attention. Inhalation: move to fresh air. Storage: store at temperatures below 120 degrees F (49 degrees c). Overexposure may cause numbness in extremities which can persist for some period of time and may be permanent. Keep out of reach of children. Do not freeze.Manufacturer
Mothers Polishes Waxes Cleaners, Inc.
5456 Industrial Drive Huntington Beach, CA 92649
UPC
00078175061102