Command Hook, Satin Nickel, Medium
1 set
On This Page
Directions
Apply: 1. Choose a location where the strip is not over grout lines. 2. Clean surface with rubbing alcohol. Do not use household cleaners. 3. Remove blue liner. Press adhesive to hook. 4. Remove black liner. Press to wall for 10 seconds. 5. To ensure adhesive hold, slide hook up and off. 6. Press base firmly for 30 seconds. 7. Use shower once and wait 24 hours to allow adhesive to build. 8. Slide hook back onto mounting base. Remove: 1. Slide hook up and off. 2. Gently hold mounting base in place. 3. Never pull the strip towards you! Always pull straight down. 4. Stretch the strip slowly against the wall at least 12 inches to release. Failure to follow instructions carefully may cause damage. Save instructions or visit command.com.
Product Details
New!. Holds 3 lb (1, 3 kg). Damage-free hanging. Holds strongly - removes cleanly. Proven to hold better than suction cups. Rust resistant. Bath. Water resistant strips. Limited Warranty and Limitation of Liability (for product sold in USA): This product will be free from manufacturing defects. If defective, your exclusive remedy shall be, at 3M's option, product replacement or refund. 3M will not be liable for any loss or damage arising from this product, whether direct, indirect, special, incidental or consequential. command.com. Save instructions or visit command.com. Hooks can be reused with command bath medium refill strips. Hooks made in China. Strips made in USA.Nutrition Facts
Warnings
Caution: Do not hang over beds or on wallpaper. Do not hang valuable or irreplaceable items or framed pictures. Apply and use 15 degrees- 125 degrees F.,Failure to follow instructions carefully may cause damage.Manufacturer
3M
St. Paul, MN 55144
UPC
00638060273319