Command Hook, Matte Black, Medium
1 kit
On This Page
Directions
Prep: Wait 7 days after painting before use. If placing on tile, choose a spot where strip is not over grout lines. Clean surface with rubbing alcohol. Do not use household cleaners or water. Apply: 1. Remove blue liner. Press adhesive to hook. 2. Remove black liner. Press to wall for 10 seconds. Complete steps 3-5. Critical steps to ensure hold. 3. Temporarily remove hook from wall to reinforce strip, Slide hook up and off base. 4. Press base firmly for 30 seconds. 5. Wait 24 hours to allow adhesive to build. Slide hook back on. Remove: 1. Slide hook up and off. 2. Gently hold mounting base in place. 3. Never pull away from wall. Stretch the strip slowly against the wall at least 12 inches to release. Hooks can be reused with command bath medium refill strips.
Product Details
Holds 3 lb 1,3 kg. Holds 3 lb (1.3 kg). Damage-free hanging. Holds strongly. Removes cleanly. Medium matte black hook. Proven to hold better than suction cups. Rust-resistant. Water resistant strips. Limited Warranty and Limitation of Liability (USA): command.com/howtouse. 1-800-934-7355. Hook made in Mexico, Strips made in USA.Nutrition Facts
Warnings
Caution: Failure to follow instructions carefully may cause damage or injury. Do not hang valuable items or framed pictures. Do not hang over beds or on wallpaper. Apply and use 15-125 degrees F.Manufacturer
3M
St. Paul, MN 55144
UPC
00638060927168