Work Sharp Micro Sharpener
1 sharpener
On This Page
Directions
Instructions: 1. Sharpen: Place knife flat on the diamond sharpening guide at the heel of the blade. Push the knife edge across the abrasive using light pressure all the way to the tip. Repeat this step using the opposing guide and pull the knife edge across the abrasive. Alternate for 5-10 strokes per side. Pro Tip: Sharpen on diamond rod until a burr is formed along the entire length of the cutting edge. 2. Hone: Switch to the ceramic. Follow the same steps as 1 above. Pro Tip: Use only the ceramic hone for touching up a knife edge. 3. Bit Driver: Bit Drives can be used to tighten or loosen common knife hardware such as pocket clips, frame fasteners, thumb studs and pivots. Accepts any 1/4 inch driver bits. More Pro Tips: Long knives may require multiple strokes in sections. Use light pressure when sharpening and honing. Serrations can be sharpened using the ceramic hone - lay the flat side of the serrations on the ceramic rod and use very light pressure to deburr.
Product Details
A portable, 2 stage knife & tool sharpener and torx bit set. Sharpens: Knives, tools. Abrasives: Ceramic, diamond. Maintenance: Torx bits, bit driver. Ultralight, Compact: Perfect size for your pocket, pack, or gear bag. Angle Guided: 20 degrees diamond sharpen guides; 25 degrees ceramic hone guides. 1/4 Inch Drive Bits: For tuning common knife hardware for pocket clips and pivot hinges. Sharpen Every Knife You Own: Hunt; pocket; serrated; filet. Learn more. 1. Fine ceramic rod. 2. Medium diamond rod. 3. T6, T8, T10 bits. 4. Lanyard. 5. Bit driver. 3 year warranty. Please leave a review where you purchased your product. worksharptools.com. Watch demo. worksharptools.com. Designed in USA. Made in Vietnam.Nutrition Facts
Warnings
You will be creating incredibly sharp knives with this sharpener. Please handle them with care. Use caution to avoid cutting yourself.Manufacturer
Darex, LLC
P.O. Box 730 210 East Hershey St. Ashland, OR 97520 USA
UPC
00662949040068