Permatex The Right Stuff Gasket Maker, Grey
3 oz (85 g)
On This Page
Directions
Directions: 1. For best results, surfaces should be clean and dry. 2. Cut nozzle and apply a continuous 1-16 in a 1/4 in (2 to 6 mm) bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. 3. Let dry for one hour then tighten to torque specifications. 4. Allow 90 minutes before filling with fluids or returning to service. 5. Replace cap after use. Note: Not recommended for use on head gaskets or parts in contact with gasoline.
Product Details
90 minutes return to service. High torque & vibration applications. Ideal for import & newer vehicles. Sensor safe. Meets OEM specs. The Right Stuff 90 minutes is the only gasket maker in a tube that can return a vehicle back to service quickly. It outperforms pre-cut gaskets by providing superior adhesion to rigid joints that experience high torque loads. A premium professional grade gasket maker for today's fast-paced professional garage and heavy DIY'er. Temperature range negative 65 degrees F to 500 degrees F intermittent. Look for other Permatex The Right Stuff branded Gasket Makers that return vehicles to service in a matter of minutes. www.permatex.com. Toll Free: 866-732-9502. Assembled in U.S.A. with U.S. and global materials.Nutrition Facts
Warnings
Warning: Cancer - www.P65Warnings.ca.gov.,Precautionary Statements Prevention: Contains: calcium carbonate, stearic acid, crystalline silica. 2-butanone oxime. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required. Wash face, hands and any exposed skin thoroughly after handling. Avoid breathing dust/fume/gas/mist/vapors/spray. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection. Precautionary Statements - Response: If in Eyes: Rinse cautiously with water for several minutes. Remove contact lenses. if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. If on Skin: Wash with plenty of soap and water, If skin irritation occurs: Get medical advice/attention. Wash contaminated clothing before reuse. Precautionary Statements - Storage: Store locked up. Precautionary Statements - Disposal: Dispose of contents/container to an approved waste disposal plant.,Warning: Eye and skin irritant. Read carefully other cautions on back. Warning: Causes serious eye irritation. May cause allergic skin reaction. May cause cancer. Keep out of the reach of children.Manufacturer
Illinois Tool Works Inc.
Solon, OH 44139
UPC
00686226343284