Permatex Sleeve Retainer, High Temp
1.22 fl oz (36 ml)
On This Page
Directions
1. Clean and dry parts using Permatex surface prep activator. 2. Apply sleeve retainer to both parts and assemble with a turning motion. 3. Parts fixture within 1 hour and are fully cured after 24 hours. Note: Product works on metal parts only, it is not for use on plastics. To disassemble parts, weaken cured sleeve retainer by heating above 500 degrees F then use pullers to separate parts.
Product Details
Secures, studs, pins, slip & press fit assemblies. Prevents fretting & corrosion. Temperature range to 400 degrees F (204 degrees C). Product Type: Product Name: Bearing Mount: Bearing mount for close fits; Item (hashtag): 60950; Color: Green; Max. Gap Fill (Diametral): .005 inch; Viscocity cP: 125; Shear Strength: 3000 PSI; Maximum Temperature: +300 degrees F (+149 degrees C); Common Applications: Refitting worn shafts and housings, repairing keyways, loose set screws, couplings, and form-in-place shims. Product Type: Product Name: Bearing mount for relaxed fits; Item (hashtag): 68050; Color: Green; Max. Gap Fill (Diametral): .015 inch; Viscocity cP: 1,250; Shear Strength: 3000 PSI; Maximum Temperature: +300 degrees F (+149 degrees C); Common Applications: Wheel bearings, idler shafts, bonds cylindrical fittings, replaces set screws, clamp and snap rings. Product Type: Product Name: Sleeve Retainer: High temp sleeve retainer; Item (hashtag): 64040; Color: Green; Max. Gap Fill (Diametral): .007 inch; Viscocity cP: 600; Shear Strength: 3000 PSI; Maximum Temperature: +400 degrees F (+204 degrees C); Common Applications: Valve guides, woodruff keys, bearings and bushings, and anchoring studs. Apply before assembly. Meets OEM specs. www.permatex.com. Toll Free: 866-732-9502. Assembled in U.S.A. with U.S. and global materials.Nutrition Facts
Warnings
Warning: Cancer - www.P65Warnings.ca.gov.,Precautionary Statements - Prevention: Contains: Dimethyl hydroperoxide, cumene, acrylic acid. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required. Do not breathe dust/fume/gas/mist/vapors/spray. Wash face, hands and any exposed skin thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wear eye/face protection. Precautionary Statements - Response: If in Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If on Skin: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse. Precautionary Statements - Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up. Precautionary Statements - Disposal: Dispose of contents/container to an approved waste disposal plant.,Warning: May cause allergic reaction. Read carefully other cautions on back. Warning: Causes skin irritation; Causes serious eye irritation; May cause cancer; May cause damage to organs through prolonged or repeated exposure. Keep out of reach of children.Manufacturer
Illinois Tool Works Inc.
Solon, OH 44139
UPC
00686226640406