Permatex Fuel Tank Repair, Ethanol Resistant
1 oz (28 g)
On This Page
Directions
Directions: 1. To achieve optimum adhesion, clean grease or dirt off surfaces to be repaired. 2. Wearing gloves twist or cut off required amount. 3. Mix by kneading epoxy stick to a uniform color. If mixing is difficult, warm epoxy stick to room temperature or slightly above. 4. Apply to the repair surface within 30 minutes of mixing, forcing into any cracks or holes to be filled. Remove excess material with a tool moistened with clean water before hardening begins. Note: When applying to a damp, wet or slowly leaking area, work the mixed epoxy into the surface and apply pressure until adhesion begins to take effect. Fuel tank repair epoxy sets in 1 hour, can be machined in 5 hours, and fully cures in 24 hours. Does not adhere to polyethylene or polypropylene plastics. This material is not intended for structural bonding. Temp Range: Up to 250 degrees F (continuous), up to 300 degrees F (intermittent).
Product Details
1 hour working time. 5 hour fixture time. Up to 500 PSI strength. Dries brown. Sticks to gasoline wet metal. Use On: Metal gas tanks & gas cans. Permatex fuel tank repair is an industrial strength formulation that is highly resistant to ethanol that is found in many fuel types. Use to make permanent repairs on fuel tanks and gas cans. No tank removal required. www.permatex.com. Toll Free: 866-732-9502. Assembled in U.S.A. with U.S. and global materials.Nutrition Facts
Warnings
Warning: Cancer - www.P65Warnings.ca.gov.,Precautionary Statements - Prevention: Contains: Magnesium silicate, calcium magnesium silicate, silica quartz. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid breathing dust/fume/gas/mist/vapors/spray. Use persona protective equipment as required. Wash face, hands and any exposed skin thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection. Precautionary Statements - Response: If in Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. If on Skin: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse. Precautionary Statements - Disposal: Dispose of contents/container to an approved waste disposal plant.,Warning: May cause allergic skin reaction. Read carefully other cautions on back panel. Waning: Causes skin irritation; May cause an allergic skin reaction; Causes serious eye irritation; May cause cancer. Keep out of reach of children.Manufacturer
Illinois Tool Works Inc.
Solon, OH 44139
UPC
00686226843340