Loctite Super Glue Ultragel Control
On This Page
Directions
Protect work area. Surfaces should be clean, dry and close fitting. 1. To puncture nozzle, turn cap clockwise until clicking sound stops. 2. Unscrew cap counterclockwise. 3. Squeeze side grips for precision dispensing. Apply sparingly to one surface. Press apar together and hold for 30-60 seconds. 4. Replace cap. For increased strength, leave bond undisturbed for at least five minutes. Finger bonded? Apply cooking oil to bonded area of skin. Gently massage bonded fingers back and forth to "peel" bond apar. Use rolling, peeling motion - do not pull.
Description
Loctite® Super Glue Ultragel® Control®. Precise Application. No Drip Or Run. Impact Resistant. Metal, Rubber, Ceramics, Wood, Leather, Paper & Most Plastics. 18 OZ (5g).Other Description
Ultragel® provides a super-tough bond that resists shock and impact. It is deal for bonds subject to daily use and harsh conditions. The Rubber toughened formula is also outdoor safe and gives more time to align pieces before glue takes hold. All rights reserved. Call: 1-800-624-7767, 9.00 am - 4:00 pm E.S.T, Monday-Friday. www.loctiteproducts.com. ©Henkel Corporation, 2012.Warnings
Contains cyanoacrylate. Can cause severe eye injury. Bonds skin instantly. May causes allergic skin reaction. Skin contact may cause burns. Use in a well ventilated area. Avoid contact with skin and eyes.First Aid: In case of eye contact, flush with water for 15 minutes, call a physician. For skin contact, flush with water. For ingestion do not induce vomiting, call a physician. If spilled on clothing flush with large quantities of water.
Keep out of the reach of children.
Do not pull.
Note: Not suitable for polystyrene foam, foam rubber, polyethylene and polypropylene. Bonded items should not be placed in oven, microwave or dishwasher.
Distributor
UPC
00079340686076