Command Brand Damage-Free Hanging Bath - 2 CT
On This Page
Directions
Save instructions or visit command.com. Apply: 1. Choose a location where strips are not over grout lines. 2. Clean surface with rubbing alcohol. Do not use household cleaners. 3. Remove blue liner. Press adhesive to hook. 4. Remove black liner. Press to wall for 10 seconds. 5. To ensure adhesive hold, slide hook up and off. 6. Press base firmly for 30 seconds. 7. Slide hook on to mounting base. 8. Wait 1 hour before use. Remove. 1. Slide hook up and off. 2. Gently hold mounting base in place. 3. Never pull the strip towards you! Always pull straight down. 4. Stretch the strip slowly against the wall at least 12 inches to release.
Description
3M Command® Brand Damage-Free Hanging Medium Bath Hooks. Holds 3lb. Holds strongly. Removes cleanly. Proven to hold better than suction cups. Water resistant strips.Other Description
Hooks can be reused with Command® bath medium refill strips. Limited warranty and limitation of liability (for product sold in USA): This product will be free from manufacturing defects. If defective, your exclusive remedy shall be, at 3M's option, product replacement or refund. 3M will not be liable for any loss or damage arising from this product, whether direct, indirect, special, incidental or consequential. Hooks made in Mexico. Strips made in U.S.A. command.com 3M and Command are trademarks of 3M. ©2015, 3M. All rights reserved.Warnings
Failure to follow instructions carefully may cause damage.Caution: Do not hang over beds or on wallpaper. Do not hang valuable or irreplaceable items or framed pictures. Apply and use 15 degrees - 125 degrees F.
Distributor
3M, Construction and Home Improvements Markets Division3M Center, St. Paul, MN 55144
1-800-934-7355
command.com
UPC
00051141958408