Command Damage Free-Hanging Large Picture Hanging Strips - 4 PRS
On This Page
Directions
Wait 7 days after painting before use. Remove hanging hardware from back of frame. Apply: 1. Clean wall with rubbing alcohol. Do not use household cleaners. 2. Separate strips. Press two strips together until they click. Each pair of strips holds 4 lb. 3. Remove one side of liners. Place each pair of strips as shown. Press firmly. 4. Remove remaining liners and press frame on wall. Press each side firmly for 30 sec. 5. To ensure adhesive hold, grab bottom corners and peel frame from wall. Do not pull straight off. Press each strip firmly for 30 seconds. 6. Wait 1 hour to reattach frame. Line up frame with strips on wall and press until each pair of strips click. Remove: 1. Grab bottom corners and peel frame from wall. Do not pull straight off. 2. Never pull the strip towards you! Always pull straight down. 3. Stretch the strip slowly against the wall at least 15 inches to release.
Description
3M Command™ Damage Free-Hanging Large Picture Hanging Strips. Holds Strongly. Removes cleanly. 1. Click. 2. Stick. 3. Press. Holds 16 lb. Up to 24" x 36".Other Description
Made with globally sourced materials. Limited warranty and limitation of liability [for product sold in USA]: This product will be free from manufacturing defects. If defective, your exclusive remedy shall be, at 3M's option, product replacement or refund. 3M will not be liable for any loss or damage arising from this product, whether direct, indirect, special, incidental or consequential. 3M and Command are trademarks of 3M. All rights reserved. Call: 1-800-934-7355. Visit: www.command.com. © 2015, 3M.Warnings
Do not apply strips to paper or soft surfaces on frame.Failure to follow instructions carefully may cause damage.
Caution: Do not hang over beds or on wallpaper. Do not hang valuable or irreplaceable items. Use indoors 50°-105°F.
Distributor
3M Center, St. Paul, MN 551441-800-934-7355
www.command.com
UPC
00051141322698