Command Clothes Hanger General Purpose
On This Page
Directions
Apply: 1. Clean surface with rubbing alcohol. Do not use household cleaners. 2. Separate strips. Remove red liners. Press adhesive to mounting bases. 3. Remove black liners. Press to wall for 10 seconds. 4. To ensure adhesive hold, slide hanger up and off. 5. Press each base firmly for 30 seconds. 6. Slide hanger on to mounting bases. Wait 1 hour before use. Remove: 1. Slide hanger up and off. 2. Gently hold mounting base in place. 3. Never pull the strip towards you! Always pull straight down. 4. Stretch each strip slowly against the wall at least 15 inches to release.
Description
3M Command™ Brand General Purpose Clothes Hanger. Holds 7.5 lb 3.4 kg. Damage-free hanging. Holds strongly. Removes cleanly.Other Description
Save instructions or visit command.com. Clothes hanger can be reused with Command® large refill strips. Limited warranty and limitation of liability (for product sold in USA): this product will be free from manufacturing defects. If defective, your exclusive remedy shall be, at 3M's option, product replacement or refund. 3M will not be liable for any loss or damage arising from this product, whether direct, indirect, special, incidental or consequential. Clothes hanger made in Mexico. Strips made in U.S.A. 1-800-934-7355. command.com. 3M and Command are trademarks of 3M. ©2015, 3M. All rights reserved.Warnings
Failure to follow instructions carefully may cause damage.Caution: do not hang over beds or on wallpaper. Do not hang valuable or irreplaceable items or framed pictures. Use indoors 50 degrees - 105 degrees F.
Distributor
3M, Construction and Home Improvements Markets Division3M Center, St. Paul, MN 55144
1-800-934-7355
command.com
UPC
00051141409481