1. Home
  2. Hooks (Fixings/Fasteners)
  3. Command Medium Designer Hooks - 2 CT

Command Medium Designer Hooks - 2 CT

On This Page

 

Directions

Apply: 1. Clean surface with rubbing alcohol. Do not use household cleaners. 2. Remove red liner. Press adhesive to hook. 3. Remove black liner. Press to wall for 10 seconds. 4. To ensure adhesive hold, slide hook up and off. 5. Press base firmly for 30 seconds. 6. Slide hook back on. Wait 1 hour before use. Remove: 1. Slide hook up and off. 2. Gently hold mounting base in place. 3. Never pull the strip towards you! Always pull straight down. 4. Stretch the strip slowly against the wall at least 12 inches to release.

 

Description

3M Command® Medium Designer Hooks. Holds 3 lb (1.3 kg). Damage-free hanging. Holds strongly. Removes cleanly. General purpose.

Other Description

Hooks can be reused with Command® Medium Refill Stips. Limited warranty and limitation of liability (for product sold in USA): This product will be free from manufacturing defects. If defective, your exclusive remedy shall be, at 3M's option, product replacement or refund. 3M will not be liable for any loss or damage arising from this product, whether direct, indirect, special, incidental or consequential. 3M and Command are trademarks of 3M. All rights reserved. Call: 1-800-934-7355. Save instructions or Visit: www.command.com. © 2016, 3M.

Warnings

Failure to follow instructions carefully may cause damage.
Caution: Do not hang over beds or on wallpaper. Do not hang valuable or irreplaceable items or framed pictures. Use indoors 50º-105ºF.

Distributor

3M Center, St. Paul, MN 55144
1-800-934-7355
www.command.com

UPC

00051131769083