Scotch Super Glue Liquid Brush-On
On This Page
Directions
1. Clean surfaces and allow to thoroughly dry. 2. To open, carefully unscrew the cap while keeping the bottle pointed away from face and body. 3. Slowly pull out the brush and lightly apply super glue onto one surface. 4. Firmly press parts together. Hold until set. 5. Wipe off excess immediately with paper towel. 6. Wipe top of bottle neck, if adhesive has accumulated, before closing bottle securely after use. 7. Store upright in a cool, dry place.
Description
Scotch® Liquid Brush-On Super Glue. Precision. Brush-on application. Brush-on. Bonds to: Wood. Metal. Plastic*. Ceramic and more! 3M.Other Description
Scotch® super glue brush-on features a convenient brush-in-cap design - great for controlling and spreading the super glue liquid. Fast-drying adhesive. Use on wood, metal, leather, ceramic, rubber, plastic* and more. For additional health and safety information, see material safety data sheet (27-8125-0) or call, 1-800-3M-Helps or 1-651-737-6501. 1-800-328-6276. www.scotchbrand.com. 3M, Scotch and the Plaid Design are trademarks of 3M. © 2011, 3M. All rights reserved.Warnings
*Not suitable for polystyrene foam, foam rubber, polyethylene and polypropylene. Keep backcard for product directions.Dangers combustible. Bonds skin and eyes instantly. Causes eye and skin irritation. May cause allergic skin reaction. May cause nose and throat irritation. Skin contact through clothing may cause burns.
Contains: ethyl cyanoacrylate, hydroquinone.
Precautions: Keep away from heat and flame. Avoid eye and skin contact. Do not get on skin or clothing. Avoid breathing of vapors. Use only with adequate ventilation. Do not swallow. Wash thoroughly after handling. Avoid excessive use of force to free bonded area. Close container after each use. Keep out of reach of children.
Suggested first aid:
Eye contact: do not force eyelids open. Immediately flush eyes with large amounts of water for at least 15 minutes. Get immediate medical attention.
Skin contact: for skin bonds: quickly soak in warm water and avoid excessive use of force to free bonded area. If unable to free bonded area, or if lips or mouth are bonded, get medical attention. If irritation persists, get medical attention. If spilled on clothing, immediately flush with large quantities of water. Do not remove bonded clothing; contact a physician.
Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention.
If swallowed: do not induce vomiting. Get medical attention.
UPC
00051141919546