Command Brand Damage-Free Hanging Broom Gripper
On This Page
Directions
Apply. 1. Clean surface with rubbing alcohol. Do not use household cleaners. 2. Separate strips. Remove red liners. Press adhesive to broom gripper. 3. Remove black liners. Press firmly to wall for 30 sec. wait 1 hour before use. 4. Push broom in to hold. Pull broom out to release. Remove. 1. Hold broom gripper gently in place. 2. Never pull the strip towards you! Always pull straight down. 3. Stretch each strip slowly against the wall at least 15 inches to release.
Description
3M Command™ Brand Damage Free Hanging Broom Gripper. Holds strongly. Removes cleanly. General purpose.Other Description
Save instructions or visit command.com. Designed to hold mops and brooms with handle diameters of 0.8" to 1.0". Gripper can be reused with Command® large refill strips. Limited warranty and limitation of liability (for product sold in USA): This product will be free from manufacturing defects if defective, your exclusive remedy shall be, at 3M's option, product replacement or refund. 3M will not be liable for any loss or damage arising from this product, whether direct, indirect, special, incidental or consequential. Broom gripper made in China. Strips made in U.S.A. 1-800-934-7355. command.com. 3M and Command are trademarks of 3M. ©2015, 3M. All rights reserved.Warnings
Failure to follow instructions carefully may cause damage.Caution: Do not hang over beds or on wallpaper. Do not hang valuable or replaceable items or framed pictures. Use indoors 50 degrees - 105 degrees F.
Distributor
3M, Construction and Home Improvements Markets Division3M Center, St. Paul. MN 55144
1-800-934-7355
command.com
UPC
00051141409474