Command Damage-Free Hanging Hooks - 2 CT
On This Page
Directions
Apply: 1. Clean surface with rubbing alcohol. Do not use household cleaners. 2. Remove red liner. Press adhesive to hook. 3. Remove black liner. Press to wall for 10 seconds. 4. To ensure adhesive hold, slide hook up and off. 5. Press base firmly for 30 seconds. 6. Slide hook back on. Wait 1 hour before use. Remove: 1. Slide hook up and off. 2. Gently hold mounting base in place. 3. Never pull the strip towards you! Always pull straight down. 4. Stretch the strip slowly against the wall at least 12 inches to release.
Description
3M Command® Damage-Free Hanging Hooks. Holds 3 lb, 1.3 kg. Holds strongly. Removes cleanly. Medium wire hooks. General purpose.Other Description
Save instructions or visit command.com. Hooks can be reused with Command® medium refill strips. Limited warranty and limitation of liability (for product sold in USA): this product will be free from manufacturing defects. If defective, your exclusive remedy shall be, at 3M's option, product replacement or refund. 3M will not be liable for any loss or damage arising from this product, whether direct, indirect, special, incidental or consequential. Hooks made in China. Strips made in U.S.A. 1-800-934-7355. command.com. 3M and Command are trademarks of 3M. ©2015, 3M. All rights reserved.Warnings
Failure to follow instructions carefully may cause damage.Caution: do not hang over beds or on wallpaper. Do not hang valuable or irreplaceable items or framed pictures.
Use indoors 50 degrees - 105 degrees F.
Distributor
3M, Construction and Home Improvements Markets Division3M Center, St Paul, MN 55144
1-800-934-7355
command.com
UPC
00051131921276