VersaBond Mortar 2 ea BAG
On This Page
Directions
1. Clean surface of contaminants. 2. Add cool water. 3. Add mortar. 4. Mix to a smooth, paste-like consistency. Up to 5 min. 5. Wait 5-10 minutes. 6. Re-mix mortar. 7. Apply skim coat with flat side of trowel. 8. Apply mortar with notch towel. 9. Press tile firmly into place. 10. Level tile surface with other tile. 11. Lightly clean off excess mortar with damp sponge. Caution: Do not over water. 12. Wait 24 hours before using or grouting. 13. Clean joints- then ready to grout. 14. Grout with Fusion Pro, the stain-proof, color-perfect single component grout, Polyblend or Prism Grout. Uses: Bonds vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, porcelain, metal and glass tile; precast terrazzo; brick; mini-brick; gauge natural stone tile. For interior or exterior floors, walls or countertops. Use white mortar when installing light colored or translucent marble, glass tile or when using light colored grout. When settling moisture sensitive natural stone or agglomerates, use EBM-Lite Epoxy Bonding Mortar - 100% solids. Do not use to install resin-backed stone. When settling glass tile over 6 inch x 6 inch (15 x 15 cm) or other synthetic bodied tile, contact technical services for recommendations. When settling dimensional stone larger than 12 inch x 12 inch (30 x 30 cm) contact technical services for recommendations regarding subfloor deflection. Acceptable Surfaces: Apply over concrete, mortar beds, masonry, backerboards, portland cement plaster, gypsum wallboard (dry areas), existing ceramic tile, exterior grade plywood (interior dy areas), sheet vinyl flooring, VCT, plastic laminates or cutback adhesive. Do not bond directly to hardwood, luan plywood, particle board, parquet, cushion or sponge-back vinyl flooring, metal, fiberglass or OSB panels.
Description
For most standard installations. Good bond strength. Recommended Primary Use (See technical data sheet for details): Longest Side of Tile: Tile Type: Ceramic: 0-15 inch; 15 inch+. Porcelain: 0-15 inch; 15 inch+. Stone: 0-15 inch; 15 inch+. Glass: 0-3 inch; 3 inch+. Average Coverage: Longest Side of Tile: Less than 8 inch: 1/4 inch x 1/4 inch x 1/4 inch square-notch trowel size; 80-95 sq ft per 50 lb. bag. 8 inch to 15 inch: 1/4 inch x 3/8 inch x 1/4 inch square-notch trowel size; 60-75 sq ft per 50 lb. bag. For tile with the longest side 15 inch+, use a medium bed mortar from Custom design for large format and heavy tile. Recommended minimum coverage (80% for dry areas and 95% for wet areas and exteriors). Back buttering may be necessary. Chart for estimating purposes. Coverage may vary based on installation practices and jobsite conditions. For more tile size, use the material calculator at www.CustomBuildingProducts.com or contact Custom Technical Services at 800-282-8786.Other Description
Refer to technical data sheet for complete application, use, and limitation information (www.CustomBuildingProducts.com or (800) 272-8786).Warnings
Cancer and reproductive harm - www.P65Warnings.ca.gov.UPC
00010186303840