GE Sealant 10.1 oz TUBE
On This Page
Directions
(1) Remove dirt, grease, moisture, soap residue & old caulk from area to be sealed. Use backer rod for gaps larger than 1/2 inch x 1/2 inch. (2) Remove cap & cut nozzle to obtain desired bead size. (3) Pierce inner foil seal. (4) Using caulk gun, apply sealant into gap. Smooth the sealant into gap. (5) Wipe hands & tools thoroughly before washing. (6) Allow 30 minutes before exposing sealant to water. Not for underwater/aquarium use or where FDA compliance is necessary. Tip: Most caulks that are water clean-up (e.g. most acrylic, siliconized acrylic or acrylic plus silicone) are not permanently waterproof.
Description
Silicone 2+. 100% Waterproof. Kitchen, bath, fixtures, countertop. 10 Year. Mold-free product protection fights mildew & fungus. 30 minutes water-ready. Adheres to more surfaces compared to most acetoxy curing silicones excellent for most metal finishes. Pro’s choice for interior wet projects. Low odor, wet & dry, non paintable. Indoor, outdoor. GE Silicone 2+ kitchen & bath 100% silicone is a 30-minute waterproof sealant with 10-year mold-free product protection. Excellent for use in the kitchen & bath as well as in plumbing applications. GE 100% silicone is 100% waterproof. Silicone is a permanently waterproof and flexible sealant. It will not shrink, crack or crumble over time. Acrylic caulk can shrink and crack, leaving gaps that can lead to water damage, mold growth and higher energy usage. 10 Years mold-free product protection: Cured sealant is resistant to stain-causing mold and mildew. Regular cleaning of the cured sealant is required however, as soap or other residue can cause secondary mold and mildew growth. Stain water-ready: Exposure to water possible in as little as 30 minutes with bead size max 3/16 inches, temperature minimum 65 degrees F and humidity minimum 50%. Otherwise, caulk should not be exposed to water for 8 hours. Do not touch or clean caulk for 24 hours. Specifications: Meets fed spec TT-S-00230C; TT-S-001543A/ASTM C-920, Type-S,NS, Class 25, use NT, M, G, A & O test requirements. Adheres to: Most ceramic tile, laminate, pancelain, glass, metal, plastic, granite and woods. Excellent for most metal finishes such as chrome, bronze & nickel. Typical uses: Showers, tubs, sinks, tile, countertops & fixtures. Typical product info: Application temp: (32 degrees F to 120 degrees F); Service temp: (-60 degrees F to 400 degrees F); Tack-free: (30 minutes); Water exposure: (30 minutes); Full cure: (24 hours); Paint over time: N/A (Non-paintable); Clean-up: (Mineral spirits); Coverage (3/16 inches bead): (51 lin. Ft); VOC (excluding water & exempt compounds): (less than 28 g/l); Carb chem curing (n-a) VOC: (less than 3.0 wt%).Other Description
For questions or information: Call toll free (866) 275-4372 or visit www.gesealants.com.Warnings
Reproductive harm - www.P65Warnings.ca.gov.UPC
00077027050707