ACE Pushbutton Latch 1 ea BLISTER PACK
On This Page
Directions
Installation Instructions: Cut out drilling template below and follow instructions for correct location of installation holes. 1. With door in closed position, place template on inside of door. 2. Mark centers of the three holes. 3. Drill the three 5/16 inch holes straight through the face of the door. Tools Required: pencil, no. 2 Philips screwdriver, drill, 5/16 inch and 1/8 inch drill bits, pliers. Mark centers of three holes. Step 1 - use two pliers to break off spindle according to instructions on right. Step 2 - Assemble outside handle with button, spindle, and spring. Push the assembly through installation holes from outside the door as shown. Step 3 - depress button to extend spindle. Position latch mechanism over holes, guiding spindle into the rectangular slot in center of mechanism. Insert both machine screws into threaded sleeves and turn each down to a snug position, then draw up firmly. Check to make sure that spindle moves freely by pushing button. Step 4: Install strike plate on wood jambo or aluminum Z bar to firmly engage latch bolt. Optional Step 5- - Use 1/8 drill for lower handle hole. Drill through outside of door only and securely fasten bottom of handle with screw provided. Outside of Door: Place spindle through center hole of door. Line up arrow with outside face of door. Inside of Door: Break off spindle on the line closest to but not inside the face of the door.
Description
Quality since 1924. Fits 3/4 in to 1-1/4 in thick doors. Optional. Thumb button. Spring. Z bar. Spindle. Strike plate. Outside handle. Inside latch. Wood jamb.Warnings
Not ApplicableUPC
00082901238096