Hillman Picture Hangers 3 ea BLISTER PACK


 

Directions

The Wall Dog has teeth, has bite, and holds tight. 1. Place screw through the hook hole until it is adjacent to the head of the screw. 2. Insert a no. 2 phillips driver bit into the recess of the screw head. 3. Locate hook replacement on the wall and screw until it feels secure, but the sure no to over tighten. Wall Dog can be driven into drywall to wood stud, or drywall to 25 gauge metal stud without pre-drilling.

 

Description

50 lb (22.7 kg) Walldog. Screw & anchor in one! Drywall/wood/concrete/masonry (For light duty applications in brick, block, and concrete; a 3/16 inches hole must be pre-drilled). Pound ratings are based on the hanger only. Effectiveness can be diminished based on the material and conditions of your wall.

Warnings

Not Applicable

UPC

00008236773743