Hillman Hangers 10 ea BLISTER PACK


 

Directions

The WallDog has teeth, has bite, and holds tight. 1. Place screw through the hook hole until it is adjacent to the head of the screw. 2. Insert a no. 2 Phillips driver bit into the recess of the screw head. 3. Locate hook replacement on the wall and screw until it feels secure but be sure not to over tighten. WallDog can be driven into drywall, drywall to wood stud, or drywall to 25 gauge metal stud without pre-drilling.

 

Description

50 lb (22.7 kg). WallDog: Nothing grips like the dog. Screws & anchor in one! Drywall/Wood/Concrete/Masonry (for light duty applications in brick, block, and concrete; a 3/16 inch hole must be pre-drilled).

Warnings

This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.

UPC

00008236773736