Command Hook 1 ea BLISTER PACK
On This Page
Directions
Apply: 1. Clean surface with rubbing alcohol. Do not use household cleaners. 2. Separate strips. Remove red liners. Press adhesive to hook. 3. Remove black liners. Press to wall for 10 seconds. 4. To ensure adhesive hold slide hook up and off. 5. Press base firmly for 30 seconds. 6. Slide hook back on. Wait 1 hour before use. Remove: 1. Slide hook on and off. 2. Gently hold mounting base in place. 3. Never pull strip towards you! 4. Stretch the strip slowly against the wall at least 15 inches to release. Failure to follow instructions carefully may cause damage.
Description
Holds 5 lb (2.2 kg). Damage-free hanging. Holds strongly. Removes cleanly. Not recommended on rough surfaces, such as cement board, brick or rough-sawn wood.Warnings
Do not hang over beds or on wallpaper. Do not hang valuable or irreplaceable items or framed pictures. Apply and use 15 degrees - 125 degrees F.Distributor
3M800-494-3552
command.com
UPC
00051141999357