Command Picture Hanging Strips 4 ea BLISTER PACK


 

Directions

1. Click. 2. Stick. 3. Press. Apply: 1. Clean wall with rubbing alcohol. Do not use household cleaners. 2. Separate strips. Press two strips together until they click. Each pair of strips holds 3 lb. 3. Remove one side of liners. Place each pair of strips as shown. Press firmly. 4. Remove remaining liners and press frame on wall. Press each side firmly for 30 sec. 5. To ensure adhesive hold, grab bottom corners and peel frame from wall. Do not pull straight off. Press each strip firmly for 30 seconds. 6. Wait 1 hour to reattach frame. Line up frame with strips on wall and press until each pair of strips click. Remove: 1. Grab bottom corners and peel frame from wall. Do not pull straight off. 2. Never pull the strip towards you! Always pull straight down. 3. Stretch the strip slowly against the wall at least 15 inches to release.

 

Description

Holds 12 lb (5.4 kg). Damage-free hanging. Holds strongly - removes cleanly. Up to 18 inch x 24 inch. For frames with narrow edges.

Warnings

Do not hang over beds or on wallpaper. Do not hang valuable or irreplaceable items or framed pictures. Use indoors 50 degrees - 105 degrees F.

Distributor

3M
800-934-7355

UPC

00051141322681