Command Picture Hangers 1 ea BLISTER PACK
On This Page
Directions
Apply: 1. Clean wall with rubbing alcohol. Do not use household cleaners. 2. For wire back frames, position post at the bottom. For sawtooth and other frames, position post at the top. Remove red liner and press adhesive to hanger. 3. Remove black liner. Press hanger firmly to wall for 30 sec. Wait 1 hour before hanging frame. 4. When ready to hang the frame, separate the stabilizer strips. Press two strips together until they click. 5. Remove one side of linersl. Place each pair of strips as shown. Press firmly. 6. Hang picture on hanger. Remove remaining liners and press frame to wall for 30 secs. Remove: 1. Grab bottom corners and peel frame from wall. Do not pull straight off. 2. Hold hanger gently in place. Never pull the strip towards you! Always pull straight down. 3. Stretch each strip slowly against the wall at least 15 inches. Repeat for stabilizer strips.
Description
Holds 5 lb (2.2 kg). Up to 11 in x 17 in (28 cm x 43 cm). Damage-free hanging. Holds strongly. Removes cleanly. Hanger can be reused with Command Large Refill Strips.Warnings
Do not hang over beds or on wallpaper. Do not hang valuable or irreplaceable items. Use one hanger per picture. Use indoors 50 degrees - 105 degrees F.Distributor
3M800-934-7355
UPC
00051141370040