Command Refill Strips 16 ea BLISTER PACK
On This Page
Directions
Not Recommended on rough surfaces, such as cement board, brick or rough-swan wood. Failure to follow instructions carefully may cause damage. Save instructions or visit command.com. Apply: 1 Clean surface with rubbing alcohol. Do not use household cleaners. 2 Separate strips. Remove blue liner. Press adhesive to clip. 3 Remove black liners. Press firmly to surface for 30 seconds per clip. 4 Use one clip for every 2 feet of light. 5 Wait 1 hour before hanging lights. Remove: 1 Gently hold clip in place. 2 Never pull the strip towards you! Always pull straight down. 3 Stretch the strip slowly against the wall at least 6 inches to release.
Description
Damage-free hanging. Holds strongly. Removes cleanly. Outdoor Exteriors.Warnings
Caution: Do not hangover beds or on wallpaper. Do not hang valuable or irreplaceable items or framed pictures. Apply 15 degrees to 125 degrees F holds- 20 degrees to 125 degrees F.Distributor
3M.800-494-3552
UPC
00051141391212