1. Home
  2. Adhesive Paste/Glue Removers
  3. Command Hook 1 ea BLISTER PACK

Command Hook 1 ea BLISTER PACK

On This Page

 

Directions

Apply: 1. Choose a location where the strip is not over grout lines. 2. Clean surface with rubbing alcohol. Do not use household cleaners. 3. Remove blue liner. Press adhesive to hook. 4. Remove black liner. Press to wall for 10 seconds. 5. To ensure adhesive hold, slide hook up and off. 6. Press base firmly for 30 seconds. 7. Use shower once and wait 24 hours to allow adhesive to build. 8. Slide hook back onto mounting base. Remove: 1. Slide hook up and off. 2. Gently hold mounting base in place. 3. Never pull the strip towards you! Always pull straight down. 4. Stretch the strip slowly against the wall at least 6 inches to release. Failure to follow instructions carefully may cause damage. Save instructions or visit command.com.

 

Description

Holds 1 lb (450 g). Damage-free hanging. Holds strongly - removes cleanly. New! Proven to hold better than suction cups. Rust resistant. Bath. Water resistant strips.

Warnings

Caution: Do not hang over beds or on wallpaper. Do not hang valuable or irreplaceable items or framed pictures. Use indoors 15 degrees - 125 degrees F.

Distributor

3M
800-934-7355
command.com

UPC

00076308728588