Prestone Tester 1 ea BLISTER PACK
On This Page
Directions
Instructions: Caution: Never open the cooling system when the engine is hot. (1) Test cooling system when engine is cool. (2) Remove the cooling system pressure cap and insert the hose of the tester into the cooling system so that it's immersed in coolant. (3) Squeeze the bulb to draw up fluid until he pointer is totally submerged. Fluid should be level with horizontal line at top of tester. Reinstall pressure cap. (4) Tap to dislodge any air bubbles. (5) Inspect fluid in tester for rust or din. If the fluid is rusty or dirty, drain the fluid and perform a flush and fill using Prestone products according to manufacturers’ recommendations. (6) Check pointer's location to determine if your vehicle is protected from freeze-up or boil-overs. Add antifreeze/coolant or drain and perform a flush and fill as necessary. To clean tester, flush thoroughly with hot water.
Description
Easy to use. See back panel. Trusted quality since 1927. Quick check concentration levels. Inspect for rust and sediment. Works with all ethylene glycol coolants. Tests freeze-up protection. Test when engine is cool; Pointer must be totally immersed fluid should be level with horizontal line at top of tester. Tap to dislodge air bubbles. Freeze point. (-34 degrees F) 50 % concentration recommended (-37 degrees C). Easy test for winter freezing and summer boil over protection. Regular monitoring can help keep you vehicle running. Recommended for use with Prestone and Prestone Dex-Cool antifreeze/coolant and all other ethylene glycol coolants. Boil over protection. 15 lb. Cap (103 kpa). (265 F) 50% Conc. Recommended (129 degrees C).Other Description
Watch how to do it yourself. Visit www.prestone.com. Questions? Call 800-890-2075.Warnings
Not ApplicableUPC
00797496004697