Oregon Grease Gun 1.5 oz BLISTER PACK
On This Page
Directions
Operations Instructions: 1. Before using the lubricant, clean out the guide bar grease hole. 2. Place the grease gun nozzle over the hole in the guide bar body. 3. Press down on the grease gun. Repeat until grease comes through the guide bar nose area, about 3 to 5 pumps. Note: All grease guns are prone to air locks which can lead to restricted grease flow. To correct, remove the plastic cap and apply even pressure to the plunger until grease fills the lower chamber. Re-install the cap and resume greasing.
Description
Pre-loaded with all-purpose lubricant. Steel-nose nozzle with spring-loaded pump action for sprocket nose guide bars. Disposable.Warnings
Not ApplicableUPC
00036577001539