Black + Decker Feed Spool 1 ea BLISTER PACK
On This Page
Directions
In order to replace or rewind the spool or clear a jam: 1. Disconnect the power source. 2. Depress the Tabs (a) and remove the cassette (b) from the cassette housing (C) in the trimmer head. 3. Grasp empty spool (d) with one hand and cassette with other hand and pull spool out from cassette. If lever (e) in base of cassette becomes dislodged, replace in correct position before inserting new spool into cassette. 4. Clear any broken line or debris and replace or rewind the spool. 5. Take the new spool and push it onto the boss (f) in the cassette. Rotate the spool slightly until it is seated. 6. Unfasten the end of one of the cutting lines and guide the line into one of the eyelets (g). The line should protrude approximately 4-3/8 inches (111mm) from the cassette. Repeat on the end of the other cutting line. 7. Align the cassette tabs (a) with the slots (h) in the housing. 8. Push the cassette onto the housing until it snaps securely into place.
Description
40 ft (0.065 in). 12.1 m (1.65 mm). Fits: GH700, GH710, GH750. Factory wound for maximum reliability.Warnings
Not ApplicableUPC
00885911027663