Bell Bicycle Inner Tube 1 ea BOX


 

Directions

How to Replace a Tube: Requires two tire levers. 1. Remove tire. Remove wheel from bike. Use thin end of tire lever to pry tire from rim. Insert 2nd lever 3 spokes away. Move levers in opposite direction. 2. Remove tube. Reach in between the rim and tire and remove tube. Check inside of tire for sharp objects and remove them. 3. Insert new tube. Slightly inflate tube, just enough to give it some shape. Insert new tube valve through valve hole in wheel. 4. Reset new tube. Use hand to reset tire back on wheel. Pry last part of tire onto rim with tire levers if needed. Be careful not to pinch the tube between the tire and rim! 5. Inflate tire. Inflate tire about half way then check to make sure it is correctly seated all the way around the rim. Inflate to recommended PSI on tire sidewall. See side panel for how to replace a tube.

 

Description

Extra long 60 mm Schrader value. Great for bikes with deep rims. Fits tire widths: x 2.10 inch - 2.25 inch. What's your valve type? Standard: Also called a Schrader valve, this short, sturdy valve type is used on car tires and is also the most common valve type for bicycles. Typically found on BMX, Cruiser Kids' and most Mountain bikes. An easy way to remember is S for Standard (Schrader/short/sturdy) and P is for Presta (performance/premium). Presta: Presta valves are typically found on Performance Road and Mountain bikes (tires that require high air pressure). They have built-in valve locks which you twist to open before inflating. Includes: one tube. Up to 30 mm rim; standard 35 mm; up to 50 mm rim; long 60 mm.

Other Description

For video instructions go to: www.thebellgarage.com.

Warnings

Not Applicable

UPC

035011952604