Elmer's Slide-All Dry Spray Lubricant
On This Page
Directions
Preparation: surfaces should be clean and dry. Application: shake well. (For narrow spray pattern, hold can closer; for broad spray pattern, hold can further away.) Hold can upright 6" from surface. Spray lightly. Try moving parts. Spray again if necessary. Clean up: wipe with clean cloth. Wash hands with soap & water.
Description
Elmer's® Slide-All® Dry Spray Lubricant. No oily stain. For general household use. Eliminates squeaking and sticking.Other Description
Elmer's Slide-All® is ideal for squeaky and sticky: Doors & windows. Zippers. Locks. Skates. Bikes. Skis. Reels. And more! Leaves no oily stain. Because it is a dry lubricant, Slide-All® will work on metal, wood, rubber, glass, leather and many plastics. Resistant to oil & water. Visit us at www.elmer's.com. For material safety data sheet, write to: Elmer's Products, Inc. ©2009 Elmer's Products, Inc.Warnings
Danger: extremely flammable. Read carefully other cautions on the side panels.Danger: extremely flammable. Contents under pressure. Vapor harmful eye irritant. Exposure may cause irritation of the chest.
Contains: acetone.
Precautions: do not smoke when using. Keep away from eyes. Avoid contact with heat, sparks and open flame. Vapors can ignite explosively. If using indoors turn off all pilot lights. Do not store or use near heat or flame. Do not puncture or incinerate or expose can to temperatures greater than 120 degrees F (50 degrees C). Use only with adequate ventilation. Keep out of reach of children.
First aid: if eye contact occurs, rinse with tap water for 5-10 minutes. If irritation persists, seek medical care. If symptoms occur, move to fresh air. If symptoms persist, see a physician. For further health information contact a Poison Control Center or call 1-888-516-2502.
Distributor
Elmer's Products, IncColumbus, OH 43219
www.elmer's.com
UPC
00026000004503