Flex Seal Liquid Rubber Sealant Coating 2 oz AEROSOL
On This Page
Directions
So easy to use! Read entire can. Wear face and eye protection, protective gloves and clothing; Make sure the area is clean, dry and free of grease, oil & dirt; Shake well: Spray 8 inches to 12 inches from surface; Apply several coats until all cracks and holes have been filled. Allow 24 to 48 hours to fully cure. Not recommended for extreme heat or gasoline related applications. Do not use on high pressure areas or tires. Works best at can temperatures above 60 degrees F. Note: After each use, invert can and apply a short burst to clear nozzle. Not intended for use by professional roofers. This product has not been tested for use in potable water systems. May not be compatible with all plastics, vinyls & rubbers.
Description
New. Liquid rubber in a can! As seen on TV. Excellent for: Roof leaks; gutters; skylights; windowsills; PVC pipes; flashings; duct work; foundations; awnings; downspouts; vent pipes; A/C drip pans; RV’s & campers; trailers & so much more! Flex seal is an easy to use rubberized coating that seeps into cracks and holes and dries to a watertight, flexible coating. Once dry, Flex Seal can be painted over. Flex Seal in the easy way to coat, seal, protect and stop leaks fast!Warnings
This product can expose you to chemicals including titanium dioxide, which is known to the State of California to cause cancer, and toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more info go to www.P65Warnings.ca.gov.Distributor
Swift ResponseUPC
852639008694