Shooter's Choice FP-10 Lubricant Elite 4 oz BOTTLE
On This Page
Directions
Temperature range (-49 Degrees F to 500 Degrees F). Directions: (1) Remove all ammunition from firearm. (2) Clean: Carbon lead and powder fouling by applying Shooter’s choice FP-100 Lubricant Elite liberally to bronze brush. Push through bore 10 times, wet patch bore, repeat this procedure until clean patch is achieved. Clean action with FP-10 using a nylon bristle brush, wipe clean with patch or cloth. (3) Lubricate: Apply FP-10 sparingly to all moving parts and wear surfaces. Work action several times to displace FP-10 into bearing surfaces. (4) Protect: Against rust and corrosion by applying FP-10 liberally to a soft clean and coat all metallic surfaces. Finish by using a clean dry patch or cloth to remove excess FP-10.Recommendations: To enhance rust and corrosion protection, apply a light coat of Shooter’s Choice rust prevent.
Description
Pro-care system. Step 20 of 3. Lubricate. Reduces friction and wear. Protects against rust and corrosion. Removes carbon, lead & powder fouling. FP-10 Lubricates, cleans and protects. Trusted brand since 1983. Note: FP-10 Contains no solid lubricants (PTFE) to build up or change. tolerances. FP-10 will not harm most wood or plastic surfaces. FP-10 will not remove copper fouling.Warnings
Not ApplicableUPC
027784000101