WD-40 Specialist Rust Remover Soak
On This Page
Directions: 1) Before soaking, remove as much dirt and loose debris as possible from the item to be treated. Remove oils and greases with a detergent or degreaser before using this product to improve the rust removal effectiveness. 2) Pour the rust remover soak into a container so that the object being treated is completely submerged. This product is ready-to-use and requires no dilution. 3) Leave the item in the solution for at least 30 minutes to remove light rust, overnight (8 hours) for medium rust, and up to 24 hours for heavily rusted items. 4) Remove the item from the solution and rinse with water and dry completely. If rust remains in the metal "pits," soak again and rinse to remove. To prevent flash rust, spray the surface with WD-40 multi-use product. For long-lasting rust protection, spray with WD-40 specialist long-term corrosion inhibitor. WD-40 Specialist rust remover soak can be re-used. The more you de-rust, the darker the solution becomes. The solution is spent when it turns black and no longer performs. Do not pour the used solution back into fresh product in the original container. Disposal: this water-based formula is extremely safe, non-toxic, VOC-free, and all ingredients are biodegradable. When used, the rust bonds to the solution and the iron becomes part of the used solution. Check with your local water treatment facility and dispose of according to local, state, and federal guidelines. Recommended temperature: Use at room temperature or higher for maximum effectiveness. Solution works best above 68 degrees F. The speed and effectiveness is significantly reduced below 60 degrees F.
DescriptionWD-40® Specialist™ Rust Remover Soak. Safely removes tough rust from metal parts and tools. All ingredients are biodegradable. Targets the rust, safe for surrounding areas. Non-toxic and acid-free.
Other DescriptionYou have a job to do. WD-40 specialist line helps you get it done! Safely and effectively removes rust without acids or caustic chemicals. This formula is non-toxic, contains no VOCs, and works without harming surrounding surfaces like rubber, plastic, and paint. 100% of the ingredients are biodegradable. Restores even intricate, hard to reach surfaces to clean, bare metal that is ready to paint. Brightens copper, brass, and similar alloys. Ideal for use on: auto restoration, tractors, antiques, farm equipment & implements, trailers & hitches, and rusty tools. WD-40 safety hotline 1-888-324-7596. wd40specialist.com.
WarningsMay cause mild skin irritation on prolonged contact. Wash hands after use. Keep out of reach of children.
First aid: ingestion (swallowed): do not induce vomiting unless directed to do so by medical personnel. Rinse mouth and drink 1 glass of water. Immediately call physician or Poison Control Center or the WD-40 safety hotline at 1-888-324-7596.
Eye contact: flush with water. Get medical attention if irritation persists.
Skin contact: wash with soap and water. If irritation develops and persists, get medical attention.