Bell Mountain 20 Inch Bike Tire
1 tire
On This Page
Directions
1. Remove Tire: Remove wheel from bike. Use thin end of tire lever to pry tire from rim. Insert 2nd lever 3 spokes away. Move levers in opposite direction. 2. Remove Tube: Reach in between the rim and tire and remove tube. Check inside of tire for sharp objects and remove them. 3. Insert New Tube: Slightly inflate tube, just enough to give it some shape. Insert new tube valve through valve hole in wheel. Push tube into wheel. 4. Reseat New Tire: Use tire lever and hand to reseat tire back on wheel. Pry last part of tire onto rim with tire levers if needed. Be careful not to pinch the tube between the tire and rim! 5. Inflate Tire: Inflate tire about half way then check to make sure it is correctly seated all the way around the rim. Inflate to recommended PSI on tire sidewall.
Product Details
Flat-defense. Anti-puncture protection. More than 25% stronger**. Replaces sizes: 1.75 inches - 2.125 inches. More than 25% stronger with Flat-defense. Carbon steel. Folding bead. Protective layer provides increased strength and extra puncture resistance. Carbon steel bead lets you fold and unfold tire without damage. 20 inches x 1.95 inches (50-406*). Maximum Pressure: 35 PSI. * 50-406 is the ETRTO measurement: (Tire width - rim diameter in mm). ** Compared to the same tire without Flat Defense. www.thebellgarage.com. For video instructions go to: www.thebellgarage.com. Made in China.Nutrition Facts
Warnings
Warning: To avoid tire and tube damage, do not use a sharp tool to mount tires. Carefully inflate tires. See tire sidewall for proper psi.Manufacturer
Bell Sports, Inc.
1001 Innovation Road Rantoul, IL 61866 United States
UPC
00035011975658