Bell Mountain 26 Inch Bike Tire
1 tire
On This Page
Directions
1. Remove Tire: Remove wheel from bike. Use thin end of tire lever to pry tire from rim. Insert 2nd lever 3 spokes away. Move levers in opposite direction. 2. Remove Tube: Reach in between the rim and tire and remove tube. Check inside of tire for sharp objects and remove them. 3. Insert New Tube: Slightly inflate tube, just enough to give it some shape. Insert new tube valve through valve hole in wheel. Push tube into wheel. 4. Reset New Tire: Use hand to reset tire back on wheel. Pry last part of tire onto rim with tire levers if needed. Careful not to pinch the tube between the tire and rim! 5. Inflate Tire: Inflate tire about half way then check to make sure it is correctly seated all the way around the rim. Inflate to recommended PSI on tire sidewall.
Product Details
26" x 2.0". Includes: one (1) tire. Flat Defense 25% stronger**. Mountain 26" x 2.0" (50-559*). Replaces Size: 1.75" - 2.125". Recommended Inflation Range: 35-65 PSI. *50-559 is the Etrto measurement: (tire width - rim diameter in mm). ** Compared to the same tire without Flat Defense. For warranty details: www.thebellgarage.com. www.thebellgarage.com. Made in Taiwan.Nutrition Facts
Warnings
Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.,Warning: To avoid tire and tube damage, do not use a sharp tool to mount tires. carefully inflate tires. see tire sidewall for proper PSI.Manufacturer
Bell Sports, Inc.
1001 Innovation Road Rantoul, IL 61866 United States
UPC
00035011975672