Bell 700c Presta Valve Self Sealing Inner Tube
1 tube
On This Page
Directions
How to replace a tube. Requires two tire levers. 1. Remove Tire: Remove wheel from bike. Use thin end of tire lever to pry tire from rim. Insert 2nd lever 3 spokes away. Move levers in opposite direction. 2. Remove Tube: Reach in between the rim and tire and remove tube. Check inside of tire for sharp objects and remove them. 3. Insert New Tube: Slightly inflate tube, just enough to give it some shape. Insert new tube valve through valve hole in wheel. 4. Reset New Tire: Use hand to reset tire back on wheel. Pry last part of tire onto rim with tire levers if needed. Be careful not to pinch the tube between the tire and rim! 5. Inflate Tire: Inflate tire about half way then check to make sure it is correctly seated all the way around the rim. Inflate to recommended PSI on tire sidewall.
Product Details
Fits Tire Widths: x19 mm-25 mm. Includes: One tube. Self sealing inner tube. Stops flats sealant inside instantly fills most holes up to 1/8". Works best with road bikes. See side panel for how to replace a tube. Stops flats while you ride! Liquid sealant inside tube flows to seal most holes up to 1/8 inch instantly while you ride. Tube sealant will not freeze or dry out. Seals punctures as they happen. Protection Against: Thorns, tacks, nails, glass, etc. Works with these bikes road. What's your valve type? Standard also called a schrader valve, this short, sturdy valve type is used on car tires and is also the most common valve type for bicycles. Typically found on BMX, cruiser, kids and most mountain bikes. An easy way to remember is "S" is for standard (Schrader, short, sturdy) and "P" is for presta (performance, premium). Presta: Presta valves are typically found on performance road and mountain bikes (tires that require high air pressure). They have built-in valve locks which you twist to open before inflating. www.thebellgarage.com. For easy-to-follow video instruction on how to change tube go to: www.thebellgarage.com. For Video Instructions go to: www.thebellgarage.com. Made in China.Nutrition Facts
Warnings
Warning: All inflatable tubes subject to deflation from mis-installation and certain hazards. Deflation can lead to loss of control of bike and injury or death. Read important instructions before installing.Manufacturer
Bell Sports, Inc.
1001 Innovation Road Rantoul, IL 61866 United States
UPC
00035011974170