Bell Bracer 1000 Adjustable Fit Dual Leg Kickstand
1 kickstand
On This Page
Directions
Instructions: 1. Unscrew backing plate of kickstand mount. 2. Mount kickstand so legs face towards the rear wheel. Ensure there are no cables interfering underneath. 3. If bicycle has a built-in kickstand plate then use of backing plate is not necessary. If no kickstand plate is present on bicycle then position backing plate with concave surface facing upwards on top of chain stay tubes. Orient plate so it does not interfere with any moving parts. 4. Place lock washer onto 8mm hex bolt and thread into kickstand. Tighten until snug. 5. Push red button on each leg to adjust height of kickstand as necessary. Note: Lubricate pivot as needed. Be sure clamp does not hinder brake or gear cables. Be sure kickstand arm does not interfere with the rear wheel or pedals. Frequently check set screw and the (3) hex bolts for tightness.
Product Details
Includes: One (1) kickstand and mounting hardware. Adjustable fit. Works with E-Bikes. 100 Lb bike weight capacity. www.thebellgarage.com. 1-800-456-Bell. Made in China.Nutrition Facts
Warnings
Warning: This product can expose you to chemicals including bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.,This kick stand is not recommended for use on carbon fiber frames. Warning: Never sit on a bicycle supported by a kickstand. For bicycle use only. If kickstand interferes with wheel rotation or shifting, serious injury or death may occur.Manufacturer
Bell Sports, Inc.
1001 Innovation Road Rantoul, IL 61866 United States
UPC
00035011994208