Scotch All Weather Fasteners - 2 CT
On This Page
Directions
1. Make sure all surfaces are clean and dry. 2. Use 1 inch of tape for every 2 pounds. Do not remove protective liner yet. 3. Align and connect two pieces of fasteners - audible snap indicates closure. 4. Remove liner on one side and apply fastener to item - press firmly on liner for good adhesive contact. 5. Remove liner on second side and apply item to mounting surface - press firmly on item for good adhesive contact.
Description
Scotch® All Weather Fasteners. Lasts 3X longer than Velcro®. Industrial strength fasteners*. Cont. 2 sets of strips. 1 x 3 in/plug (25,4 x 76,2 mm) EA. Clear. 3M.Other Description
For indoor and outdoor use. Works on most surfaces that are clean, dry and sealed with paint or varnish including wood, brick, metal, concrete, bare glass and many plastics. Each inch of product holds up to 2 lbs. - do not hang objects over 8 lbs. *Based on adhesion testing after simulated sunlight exposure. Made in U.S.A. with globally sourced materials. All rights reserved. Questions or comments? Call toll-free 1-800-3M-HELPS. 1-800-494-3552. http://www.3m.com. 3M, Scotch and the Plaid Design are trademarks of 3M. ©2011, 3M.Warnings
Note: this is a permanent adhesive and may cause damage if removed. Not recommended for use on drywall, wallpaper and other delicate surfaces. Do not use in spaces where injury might occur if mounted object fell.Distributor
3M Construction and Home Improvement Markets Division3M Center St. Paul, MN 55144-1000
1-800-494-3552
www.3m.com
UPC
00051131642843